Anfim
Anfim Pratica Espresso Grinder
- SKU:
- pratica-anfim-sp
- MPN:
- pratica
- Condition:
- New
- Availability:
- Expected In 2025
Description
-
What's in the Box
- Anfim Pratica Espresso Grinder
- Grounds Tray
- Hopper
Economical Excellence
Look familiar? Yep, it’s exactly what you think. The Anfim Pratica is essentially a rebranded Mahlkonig, featuring the very same motor assembly, burrs and electronics found in the E65S. By incorporating more plastic in the body and streamlining the top plate, this classic grinding platform becomes exceptionally affordable without compromising performance. For cafes seeking the performance of a Mahlkonig grinder without breaking the bank, the Anfim Pratica is the obvious choice.
Built With Your Cafe In Mind
The Pratica’s 65mm flat hardened steel burrs put out around 4-5g per second, bringing total dosing time for a doubleshot to around 4 seconds or less. In combination with its sturdy 580 watt motor, the Pratica is rated for a duty cycle of approximately 2 shot cycles per minute, making this grinder ideal for low to mid volume cafes or as a secondary grinder.
Precision Dosing
A large digital display allows programmable control of up to 8 shot cycles in addition to a manual mode. Each program may be set in increments of 1/10th of a second, allowing the Pratica to consistently hit precise dose weights, shot after shot. An integrated declumper effectively reduces clumping and creates extremely fluffy and well-distributed grounds, ensuring less channeling and more even extractions.
-
65mm Flat Steel Burrs
-
Stepless Grind Adjustment
-
Programmable Timed Grinding
-
Fast, quiet grinding for espresso
More Features
Large Digital Display
Brews A Full Pot In 4-6 Minutes
Compact footprint
Removable spout makes cleaning easier
New declumper for fluffy and centered mound of grinds
Specifications
| Manufacturer: | Anfim |
| Model: | Pratica |
| Manufacturer Origin | Italy |
| Dimensions | 7.67” (W), 22.75” (H), 15.2” (D), 25lbs |
| Power | 110v, 60hz, 580W, 5.2amps |
| Grind Speed | 4-5g per second at 250 microns |
| Hopper Capacity | 2.6lbs |
| RPM | 1700RPM |
| Certifications | Standard ANSI/UL 763 - CSA C22.2 No. 195, NSF / ANSI 8 |
| Burr Type | Special Steel (flat) |
| Burr Size | 65mm |
| Warranty | 1 Year Parts and Labor Warranty Covered Through Prima |
| Duty Cycle | 2 cycles per minute - 5 seconds on, 25 seconds off |