PuqPress M2 Automatic Tamper for Mythos 1 & 2 Grinders

Product Code
puq-m2-puqpr-pp
$1,359.99

Measurements

Weight
16.75 lbs
Length
15 in
Width
10 in
Height
14 in

Details

Looking to streamline your workflow and keep your barista elbow at bay? You needn't look much further than the Puqpress M2 electronic tamping system. The Puqpress uses electronically adjustable tamping pressure so you can set it to your desired force, and it will tamp to the same setting every time. With the Puqpress M2, you can mount the tamper directly beneath your Nuova Simonelli/Victoria Arduino Mythos 1 or Mythos 2 espresso grinder, streamlining your production process and saving on precious counter space.

To set up the Puqpress M2, you'll need the included socket wrench and a clean and dry portafilter. Begin by unplugging the Puqpress and setting it upside down on a flat surface. Then, loosen the two bolts beneath the portafilter clamp. Gently insert the portafilter so the basket rim runs flat and flush against the piston (your portafilter spouts should be facing upward). With the portafilter held firmly in place, use the thumbwheel to tighten the clamp to hold the portafilter in place, then back it off slightly so the portafilter is snug but easy to remove. Tighten down both bolts again to set the clamp in place. From there, simply upright the Puqpress M2, run your Mythos power cable through the internal cavity, and mount the grinder on top of the tamper.

Adjusting the tamping pressure is simple: just press the + or - buttons to increase or decrease the pressure. The M2 can tamp between 20-60 lbs, giving you plenty of options for your desired results. To clean the tamper piston, first press the Cleaning button. This will extend the piston so you may safely remove residual grounds with a soft brush or cloth. DO NOT try to clean the piston without setting to Cleaning mode first, as the sensor may trip and trigger the piston, which could result in injury. Once the piston is cleaned, press the Cleaning button again to retract the piston.

Puqpress is rated fully for commercial use, with NSF-8, ETL, CE, and CB approvals. For the Mahlkonig-compatible model of this product, please see our Puqpress M1 listing.

Features

What's in the box:

  • Puqpress M2 Automatic tamper
  • User manual and quick start guide
  • Two adjustment wrenches
  • Power cable

Features:

  • Tamps consistently and level every time
  • Fit beneath your Mythos 1 or Mythos 2 grinder
  • Adjustable pressure from 20-60 lbs
  • Coated piston reduces stuck-on grinds
  • 58.3 mm diameter sized for most precision espresso baskets
  • New adjustment wheel for easy and precise setting of portafilter fork
  • Available in black or white (select color from options above)
  • 1 year manufacturer warranty
  • Weight: 13 lbs (6 kg)
  • Dimensions: 15" D x 7" H, 7.25" W
  • Height with grinder: 26" (Mythos 1), 28" (Mythos 2)
  • Made in the Netherlands

Specifications

Specifications:
Manufacturer: Puqpress
Model: M2
Dimensions 15" D x 7" H, 7.25" W
Weight 13 lb
Piston size: 58.3 mm
Pressure: 20-60 lbs
Power 110-240 V 50-60 Hz 76 W
0 stars, based on 0 reviews