This silicone rubber plug is intended to block the flow of water from the bottom of the Cafelat Robot's basket, allowing easier pre-heating. This plug also serves to verify the functionality of the pressure gauge by acting as a blank disk. To pre-heat...

This pressure guage will replace a broken gauge on the Cafelat Robot Barista espresso maker, but should not be retrofitted to the standard model. Contact us if you need support for this part.

These spare screen pins are made to keep the puck screen of your Cafelat Robot cooler to the touch and easier to remove. Simply push the pin into the middle of the puck screen to use them. Please note that these spare pins are not compatible with the...

The Robot comes in two editions the barista model, which includes a pressure gauge, and a regular model, which doesn't. These Parker Legris push fittings (⅛ BSPP) are one of the many components required for converting the Regular Robot to the...

The Robot Tamper Mat is a 5 x 2.75-inch, dual-purpose silicone mat. The side with ridges was designed to be placed on the drip tray to protect the painted Robot base from chips and scratches. The side with two circular recesses was designed to hold the...

The Robot is shipped standard with the Professional Basket, a 58mm stainless steel basket that requires finely ground coffee from a premium burr grinder. This alternative, the Pressurized Basket, will work with...

The Robot comes in two editions—the barista model, which includes a pressure gauge, and a regular model, which doesn't. This stainless steel mesh filter is one of the many components necessary for converting the regular Robot into the Barista. It fits...

The Robot's filter basket is deeper than conventional baskets to account for a manual dose of water. As such, the Robot needs its own tamper, one capable of reaching the recessed coffee evenly. The Robot...

The Cafelat Robot comes standard with hands that look like the head of a wrench. They are precisely machined to hold the tamper, but not necessarily the barista's hand, comfortably in their grasp. Paul Pratt...

Like the main body, the Robot base is aluminum—as a result, the bottom is smooth and slippery. To prevent the Robot from sliding across the countertop during operation, the base is fitted with this 5.5-inch (diameter) black silicone rubber gasket. This...

A replacement hose assembly for the pressure gauge on the Cafelat Robot Barista Manual Espresso maker. A perfect fix for a damaged pressure gauge system on your Robot Barista. This hose replacement kit is made to replace the hose assembly for the...

These filter papers are made to use with the Cafelat Robot manual espresso maker to help reduce channeling and achieve more even extractions. "‹These 58 millimeter filter papers are intended for use with the Cafelat Robot manual espresso maker. Placed...